Left-Arm Loveseat With a Console
The 8303-2R-LC measures 168 x 95 x 104 cm, the wider of the two loveseats, because a console runs between its two seats. Two cup holders sit in the console top, so drinks stay level once both footrests are up.




| Share | |
|---|---|
| Categories | Custom Recliner Sofa Set |
| Brand | PandaSofa Recliner Sofa Manufacturer |
| Product Specifications | 8303 |
| Brand | PandaSofa Recliner Sofa Manufacturer |
| Model | 8303 |
| Configuration | 8303-2R-LC + 8303-1W + 8303-2R-R, three pieces per set |
| Material | Leather or tech cloth upholstery, colour confirmed per order |
| Opening Method | Reclining motion on both loveseats; manual or power drive confirmed per order |
| Package Size | 168x76x65 / 138x76x65 / 133x83x65 cm, one carton per piece |
| Application Scenarios | Living room, home theatre, open-plan apartment |
| Business Model | OEM/ODM |
| Use | For Relaxation And Rest |
| Seat Construction | Pocket spring and foam seat, fibre back |
| Frame | Plywood |
| Base Material | Metal |
| Maximum Capacity | 120-150 kg per seat |
| Seat Height | 50 cm |
| Seat Depth | 53 cm |
The 8303 is quoted as three separate pieces: a left-arm motion loveseat with a console, a plain right-arm motion loveseat, and a wedge. Brought together they form a U-shaped corner group with four reclining seats. The dimensions, carton sizes and weights below are taken from the factory packing list for this model, not from a rendered drawing.
The 8303-2R-LC measures 168 x 95 x 104 cm, the wider of the two loveseats, because a console runs between its two seats. Two cup holders sit in the console top, so drinks stay level once both footrests are up.
The 8303-2R-R is 138 x 95 x 104 cm with no console, so it seats two people shoulder to shoulder. It works as the return that closes the other side of the room shape.
The 8303-1W is 145 x 99 x 104 cm. It is the only piece built to a 99 cm depth against the 95 cm of the loveseats, and it is what turns the two runs into an angle instead of leaving a gap between them.
The factory packing list names both loveseats as motion loveseats, so the reclining mechanism is part of the piece rather than a later add-on. What the current documentation does not fix is the drive, so the configuration belongs in the order confirmation:
A lever on the outside of the arm, pushed back by body weight. Nothing behind the sofa has to be wired, which is what rental apartments, older European flats and island layouts usually need.
A motor and switch, for buyers who want the footrest to stop where the motor stops rather than where the latch releases. Voltage and plug are set per destination market.
Plywood frame, pocket spring and foam seat, fibre back. The seat build does not change with the drive type, so a dealer can stock one upholstery programme and still offer both configurations.
| Configuration | Three-piece set: 8303-2R-LC, 8303-1W, 8303-2R-R |
|---|---|
| 8303-2R-LC, LAF motion loveseat with console | 168 x 95 x 104 cm; carton 168 x 76 x 65 cm; 59 / 66 kg |
| 8303-1W, wedge | 145 x 99 x 104 cm; carton 133 x 83 x 65 cm; 24 / 30 kg |
| 8303-2R-R, RAF motion loveseat | 138 x 95 x 104 cm; carton 138 x 76 x 65 cm; 44 / 50 kg |
| Seating geometry | Seat depth 53 cm, seat height 50 cm, back height 67 cm on the two loveseats |
| Frame and fill | Plywood frame; pocket spring and foam seat; fibre back |
| Recline | Motion mechanism on both loveseats; manual or power confirmed per order |
| Packing | Carton, one box per piece; three cartons to a set |
One model number covers a full U-shaped room set, so a showroom gets a corner layout without mixing three different models and hoping the finishes match.
Each piece carries its own carton and weight: 168 x 76 x 65 cm at 66 kg gross, 133 x 83 x 65 cm at 30 kg gross, and 138 x 76 x 65 cm at 50 kg gross. The plan can be built piece by piece before the container is booked.
A 104 cm back height and 53 cm seat depth give the piece the height to sit behind a low sofa, and the wedge lets the layout follow a room corner instead of cutting the floor in half.
PandaSofa runs its own R&D, manufacturing and sales, with an in-house quality inspection team on the line. Metal mechanisms are cycle tested in house, and frames and wooden parts are cut to the ergonomic drawing for each model rather than to a generic block.

+86 13065823738